2016-01-31T16:55:56Z http://www.theatreface.com/forum/topics/qlab-question?groupUrl=sound&feed=yes&xn_auth=no tag:www.theatreface.com,2011-03-16:2529492:Comment:92148 2011-03-16T00:42:27.314Z Candyce Iseminger http://www.theatreface.com/profile/CandyceIseminger

What had happened was that the crosspoints were not selected properly. Props to the help support crew for QLab when I emailed my problem I had someone working with me with in 30 mins. They went thru things from the most common and worked thru the audio path til they found what I had not known. (I had a rental license for the run of my production and that was the first question)

What had happened was that the crosspoints were not selected properly. Props to the help support crew for QLab when I emailed my problem I had someone working with me with in 30 mins. They went thru things from the most common and worked thru the audio path til they found what I had not known. (I had a rental license for the run of my production and that was the first question) tag:www.theatreface.com,2011-03-15:2529492:Comment:91844 2011-03-15T22:15:00.170Z samkusnetz http://www.theatreface.com/profile/samkusnetz

sounds to me like you are using the free version of qlab, which only allows stereo output. to use more than two outputs, you'll need to buy or rent a pro audio license from figure53.com

sounds to me like you are using the free version of qlab, which only allows stereo output. to use more than two outputs, you'll need to buy or rent a pro audio license from figure53.com tag:www.theatreface.com,2011-02-17:2529492:Comment:87648 2011-02-17T23:18:52.179Z Robert Russo http://www.theatreface.com/profile/RobertRusso

<p>When you start your motu device, what does the motu software pop up say?</p> <p> </p>

<p>When you start your motu device, what does the motu software pop up say?</p> <p> </p> tag:www.theatreface.com,2011-02-17:2529492:Comment:87283 2011-02-17T17:38:42.106Z Candyce Iseminger http://www.theatreface.com/profile/CandyceIseminger

yup... MOTU is installed on the laptop... and all speakers play when run thru iTunes

yup... MOTU is installed on the laptop... and all speakers play when run thru iTunes tag:www.theatreface.com,2011-02-17:2529492:Comment:87075 2011-02-17T01:23:28.349Z Robert Russo http://www.theatreface.com/profile/RobertRusso

That usually means that Qlab is not seeing the midi interface properly. In preferences, audio device routing you should have 1 wire from say Patch 1 to the motu device. Sometimes people have had more than 1 wire to a device and it made the device unhappy. I assume that you have installed the Motu driver?

That usually means that Qlab is not seeing the midi interface properly. In preferences, audio device routing you should have 1 wire from say Patch 1 to the motu device. Sometimes people have had more than 1 wire to a device and it made the device unhappy. I assume that you have installed the Motu driver? tag:www.theatreface.com,2011-02-17:2529492:Comment:87174 2011-02-17T00:29:28.844Z Candyce Iseminger http://www.theatreface.com/profile/CandyceIseminger

I see them.... BUT only 2 of them are controllable.

I see them.... BUT only 2 of them are controllable. tag:www.theatreface.com,2011-02-17:2529492:Comment:87074 2011-02-17T00:22:03.030Z Robert Russo http://www.theatreface.com/profile/RobertRusso

So you highlight the Cue, open the inspector, click on the level tab (not the trim tab). Do you see the 2 input controls? (circle dials) and the 8 (or more) Output controls?

So you highlight the Cue, open the inspector, click on the level tab (not the trim tab). Do you see the 2 input controls? (circle dials) and the 8 (or more) Output controls? tag:www.theatreface.com,2011-02-16:2529492:Comment:87253 2011-02-16T23:57:11.490Z Candyce Iseminger http://www.theatreface.com/profile/CandyceIseminger

I have 8 speakers that are separately running thru MOTU 896HD. I want to change which output a specific cue is run thru. However I cannot control the outputs on the Cue Inspector Tab. That's my issue. Yes my license exists and yes I can run the outputs in the edit device routing page.

I have 8 speakers that are separately running thru MOTU 896HD. I want to change which output a specific cue is run thru. However I cannot control the outputs on the Cue Inspector Tab. That's my issue. Yes my license exists and yes I can run the outputs in the edit device routing page. tag:www.theatreface.com,2011-02-16:2529492:Comment:87072 2011-02-16T23:43:58.947Z Robert Russo http://www.theatreface.com/profile/RobertRusso

<p>Define what you mean by "Change where the sound comes from". Do you want a specific cue to be routed to a specific speaker? Describe your sound system set up.</p> <p>BR</p>

<p>Define what you mean by "Change where the sound comes from". Do you want a specific cue to be routed to a specific speaker? Describe your sound system set up.</p> <p>BR</p> tag:www.theatreface.com,2011-02-16:2529492:Comment:87356 2011-02-16T23:07:43.102Z Candyce Iseminger http://www.theatreface.com/profile/CandyceIseminger

I can see 8 faders but only can control 2 outputs.... I'm confused....

I can see 8 faders but only can control 2 outputs.... I'm confused....